Lucas Silicone Sealant #8500 - High Solids - Full Range

Lucas #8500 Silicone Mastic is a high solids non-shrinking moisture cure silicone mastic intended for flashing, sealing and repairing roofs, walls, masonry and metal roof seams & fasteners. #8500 has minimal odor, contains no solvents and less than 10 grams per liter VOC. Use to seal penetrations and terminations prior to application of Lucas #8000 100% Silicone Roof Coating. Excellent adhesion to concrete, masonry, vinyl, fiber cement, polyurethane foam, EPDM, aged acrylic coatings, granular cap sheet, wood, metals, Kynar® and most other common building materials. May be applied to wet and underwater surfaces. Lucas #8015 TPO Primer is required for application TPO roofs.

Lucas #8500 is a non-reactive oxime, neutral cure silicone and will bond extremely well to a wide variety of surfaces. It does not emit acidic byproducts during cure like acetoxy silicone sealants.

Application:

Surface to be sealed must be clean but may be slightly damp. Apply with a trowel or 4 inch chip brush at a minimum of ¼ inch thick and taper the edges of the application. Lucas #8500 is immediately weather resistant.

Application below 32ºF (0º C) is possible however curing requires free moisture in the air and will not begin until the temperature is above freezing.